LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> GS 430 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Communication System >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Hand-Held Tester

Using Hand-Held Tester

NOTE: Always record DTCs during retrieval.
NOTE: An OBD II scan tool complying with SAE J1978 can be used if Lexus hand-held tester is not available.

Prepare the hand-held tester. Connect the hand-held tester to the DLC3. See Fig 1. Turn the ignition switch ON and switch the hand-held tester main switch ON. Use the hand-held tester to check the DTCs, note them down. For operating instructions, see the hand-held tester instruction manual. See DIAGNOSTIC TROUBLE CODE INDEX  table to confirm the details of the DTCs.

Fig 1: Connecting Hand-Held Tester To DLC3
G00184924Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals