Section 341 (Rear Seat): Installation

WARNING: This page is about a different car, the 2003 Lexus GS 430 and 2003 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SEATBACK ASSEMBLY
HINT:

Before installation, confirm that the seat belts are positioned correctly.
1. Mount the seatback assembly to the body.
  HINT:
  
  Hook the frames on the stud bolts on the body side.
  
  Fig 1: Installing Seatback Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Rip the seatback cover open and install the nut.
  
  Fig 2: Installing Bolts To Seatback Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Use the same manner described above to the other side.
  
  Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
3. Install the 4 bolts.
  Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
4. Install the seat belt to the shoulder belt guide.
INSTALL SEAT CUSHION ASSEMBLY
1. Pass the seat cushion wire to seatback.
2. Push down the cushion to install the hook to the body panel.
  HINT:
  
  Confirm that the seat is installed firmly.
INSTALL HEADRESTS