LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> ES 300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (Engine Cooling System) >> Engine Coolant Temp Sensor >> Removal

Engine Coolant Temp Sensor: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR.
  1. Drain cooling system below engine coolant temperature sensor level (Refer to STANDARD PROCEDURE - COOLING SYSTEM DRAINING ).
  2. Disconnect negative cable from remote jumper terminal (Figure )
  3. With the engine cold, disconnect coolant sensor electrical connector.
  4. Remove sensor.
scientia non olet · About LEMON Manuals