Rocker Panel Molding LH: Replacement

WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The installation procedures are the removal procedures in reverse order.
Use the same procedures for the RH side and LH side.

REMOVE ROCKER PANEL MOLDING LH
1. Remove the 6 screws.
2. Using a screwdriver, pry out the rocker panel molding.
HINT:

Tape the screwdriver tip before use.

Fig 1: Removing Rocker Panel Molding LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002