Washer Motor Circuit
NOTE:
Front and rear wipers use the same washer motor. When testing washer motor, use front wiper switch to actuate motor.
Disconnect 3-pin washer motor connector. See Fig 1. Check circuit at harness side of connector. See WASHER MOTOR CIRCUIT table.
WASHER MOTOR CIRCUIT
| Terminal No. | Switch Position | Specification |
|---|---|---|
| 1-Ground | Washer Switch Off | No Continuity |
| 1-Ground | Washer Switch On | Continuity |
| 2-Ground | Ignition Switch In LOCK Or ACC Position | No Voltage |
| 2-Ground | Ignition On | Battery Voltage |