Tachometer Circuit
NOTE:
If Lexus hand-held tester is not available, begin testing with step 2).
- Connect Lexus hand-held tester to Data Link Connector No. 3 (DLC3). With tester in ACTIVE TEST mode, operate tachometer. If tachometer needle moves as commanded by tester, perform next check listed in appropriate symptom diagnosis table. See TROUBLE SHOOTING . If tachometer needle does not move as commanded by tester, go to next step.
- Check tachometer. See TACHOMETER under COMPONENT TESTS. Repair as necessary. If tachometer is okay, go to next step.
- Check combination meter 22-pin connector at circuit plate. See Figure. See INSTRUMENT CLUSTER CIRCUIT PLATE under COMPONENT TESTS. Repair as necessary. If voltages are to specification, replace instrument cluster.