Wiper Motor
- Disconnect 6-pin wiper motor connector. Connect battery positive lead to wiper motor terminal No. 3 (Blue/Red wire) and negative battery lead to terminal No. 1 (White/Black wire). See Fig 1. If wiper motor operates at low speed, go to next step. If wiper motor does not operate at low speed, replace wiper motor.
- Connect battery positive lead to wiper motor terminal No. 2 (Red/Blue wire) and negative battery lead to terminal No. 1 (White/Black wire). See Fig 1. If wiper motor operates at high speed, go to next step. If wiper motor does not operate at high speed, replace wiper motor.
- Operate motor at low speed and stop motor anywhere except in park position by disconnecting battery positive lead from wiper motor terminal No. 3 (Blue/Red wire). Leave battery negative lead connected to wiper motor terminal No. 1 (White/Black wire). Connect a jumper wire between wiper motor terminals No. 3 (Blue/Red wire) and No. 5 (Blue/White wire). Connect battery positive lead to terminal No. 6 (Blue wire). Wiper motor should momentarily operate, and then stop in park position. If wiper motor does not operate as specified, replace wiper motor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002