Park/Neutral Position Switch
Disconnect harness connector at park/neutral position switch. Switch is located on left side of transmission. Using ohmmeter, check for continuity between specified terminals in accordance with shift lever position. See PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS table. Replace PNP switch if defective.
PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS
| Application & Shift Lever Position | (1) Continuity Between Terminals No. | ||
|---|---|---|---|
| Park | 1 & 3; 6 & 9 | ||
| Reverse | 2 & 3 | ||
| Neutral | 3 & 5; 6 & 9 | ||
| Drive | 3 & 7 | ||
| 2 | 3 & 4 | ||
| Low | 3 & 8 | ||
|
|||