LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> LX 470 >> Repair and Diagnosis >> Steering >> Power Steering >> Power Rack & Pinion >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Control Valve Assembly Bearing Guide Nut 18 (25)
Control Valve Housing-To-Steering Rack Housing Bolt 13 (18)
Cylinder End Stopper(1) 49 (66)
Engine Oil Filter Assembly Bolt & Nut With Bracket 13 (18)
Power Steering Gear Assembly-To-Body Bolt 74 (100)
Pressure Tubes-To-Steering Rack (2) 15 (20)
Power Steering Pump Mount Bolt 13 (17)
Power Steering Pump Pressure Port Union-To-Front Housing 61 (83)
Power Steering Pump Pressure Tube Union Banjo Bolt 42 (56)
Power Steering Pump Pulley Nut (3) 32 (43)
Power Steering Pump Rear Housing-To-Front Housing Bolt 17 (24)
Rack End(4) 56 (76)
Rack Guide Spring Cap Lock Nut(5) 38 (51)
Return Tube-To-Steering Gear (6) 26 (36)
Steering Column Intermediate Shaft-To-Steering Rack Input Shaft Bolt 25 (34)
Steering Wheel Set Nut 25 (34)
Tie Rod End-To-Steering Knuckle Nut 90 (122)
Tie Rod End Lock Nut 41 (55)
Tube Clamp Bolts 13 (18)
Tube Support Retainer Bolt 14 (19)
INCH Lbs. (N.m) 
Steering Wheel Pad Torx Screw 78 (8.8)
Suction Port Union Bolt 115 (13)
(1) Cylinder end stopper torque specification is for use with special service tool. See Figure.
(2) Pressure feed tube torque is for use with special tool. See Figure.
(3) Non-reusable part. Replace nut during installation.
(4) Rack end torque is for use with special tool. See Figure.
(5) Rack guide spring lock nut torque is for use with special tool. See Figure.
(6) Fluid return tube torque is for use with special tool. See Figure.