LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> LX 470 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Component Tests >> Door Unlock Detection Switch

Door Unlock Detection Switch

  1. Remove door trim panel and service hole cover. Disconnect Black 4-pin harness connector for door unlock detection switch. See Figure.
  2. Connect ohmmeter between terminals No. 1 and 4 on harness connector for door unlock detection switch. See Figure.
  3. Continuity should exist in LOCK position and continuity should not exist in UNLOCK position by using lock switch on door. See Figure. Replace door unlock detection switch if defective.
scientia non olet · About LEMON Manuals