LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> LS 400 >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels >> Circuit Tests >> Bulb Circuit

Bulb Circuit

NOTE: If Lexus hand-held tester is not available, begin testing with step 2).
  1. Connect Lexus hand-held tester to Data Link Connector No. 3 (DLC3). With tester in ACTIVE TEST mode, operate appropriate indicator/warning lights. If light operation is okay, perform next check listed in appropriate symptom diagnosis table. See TROUBLE SHOOTING . If light operation is not okay, go to next step.
  2. Remove bulb in question. Using DVOM, check for continuity between bulb terminals. If continuity is present, go to next step. If continuity is not present, replace bulb.
  3. Check warning light circuit plate. See INSTRUMENT CLUSTER CIRCUIT PLATE  under COMPONENT TESTS. Repair as necessary. If circuit plate is okay, replace combination meter assembly.
scientia non olet · About LEMON Manuals