LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> ES 300 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Disposal Procedures >> Off-Vehicle Deployment >> Passenger-side AIR Bag Module

Passenger-side AIR Bag Module

  1. Before proceeding, See AIR BAG SAFETY PRECAUTIONS . Disconnect negative battery cable. Remove passenger-side air bag. See PASSENGER-SIDE AIR BAG MODULE  under REMOVAL & INSTALLATION.
  2. Position passenger-side air bag inside a scrap tire with deployment side facing inside of tire and secure with strong wire. See Fig 1. Place this tire between 4 other tires (top tire should have wheel installed). Securely tie all tires together with wire.
Fig 1: Preparing Air Bag For Deployment
G98H08194Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. Connect Deployment Tools (09082-00700 and 09082-00760) to passenger-side air bag connector. Position deployment tool at least 33 feet away from passenger-side air bag. Press activation switch to deploy passenger-side air bag. Because of heat, wait 30 minutes before handling passenger-side air bag. Seal deployed air bag module in vinyl bag and dispose of in usual manner.
scientia non olet · About LEMON Manuals