Integration Relay Circuit
Remove integration relay from instrument panel junction block. Check for continuity or voltage between ground and specified terminals. See INTEGRATION RELAY CIRCUIT TEST table. If values are as specified, replace relay. If values are not as specified, check and repair wiring harness as necessary.
INTEGRATION RELAY CIRCUIT TEST
| Terminal No. (1) | Condition | Value | ||
|---|---|---|---|---|
| 8 | Driver's Seat Belt Disconnected | No Continuity | ||
| 8 | Driver's Seat Belt Connected | Continuity | ||
| 10 | Always | Continuity | ||
| 7 | Ignition: OFF Or ACC | No Voltage | ||
| 7 | Ignition: ON | Battery Voltage | ||
| 9 | Ignition: OFF Or ACC | No Voltage | ||
| 9 | Ignition: ON | Battery Voltage | ||
|
||||