LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> ES 300 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Circuit Tests >> Engine Hood Courtesy Switch Circuit

Engine Hood Courtesy Switch Circuit

  1. Engine hood courtesy switch is built into hood lock assembly. Turn ignition off. Remove hood lock assembly. Disconnect engine hood courtesy switch connector. Using an ohmmeter, check continuity between engine hood courtesy switch terminals. With hood unlocked, continuity should exist. With hood locked, continuity should not exist. If continuity is as specified, go to next step. If continuity is not as specified, replace engine hood courtesy switch.
  2. Check circuits for faults between engine hood courtesy switch, anti-theft ECU and body ground. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, check anti-theft ECU pin voltages. See ANTI-THEFT ECU PIN VOLTAGE TESTS  under COMPONENT TESTS. Replace components as necessary and retest system operation.
scientia non olet · About LEMON Manuals