Sensor Circuit Values (SC300 & SC400)
SENSOR CIRCUIT VALUES - HARNESS DISCONNECTED (SC300 & SC400)
| Tester Connection | Condition | Circuit Value |
|---|---|---|
| 1 & Ground | Ignition Switch In LOCK Or ACC Position | No Voltage |
| 1 & Ground | Ignition Switch In ON Or START Position | Battery Voltage |
| 2 & Ground | Constant | Battery Voltage |
| 3 & Ground | Door Courtesy Switch In OFF Position | No Continuity |
| 3 & Ground | Door Courtesy Switch In ON Position | Continuity |
| 4 & Ground | Light Control Switch In OFF, TAIL Or HEAD Position | No Continuity |
| 4 & Ground | Light Control Switch In AUTO Position | Continuity |
| 5 & Ground | Light Control Switch In OFF Or TAIL Position | No Continuity |
| 5 & Ground | Light Control Switch In HEAD Position | Continuity |
| 6 & Ground | Light Control Switch In OFF Position | No Continuity |
| 6 & Ground | Light Control Switch In TAIL Or HEAD Position | Continuity |
SENSOR CIRCUIT VALUES - HARNESS CONNECTED (SC300 & SC400)
| Tester Connection | Condition | Circuit Value |
|---|---|---|
| 4 & Ground | Ignition On, Light Control Switch In AUTO Position & Sensor Covered (Gradually) | Taillights Illuminate Before Headlights |