LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1999 >> ES 300 >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels >> Component Tests >> Integration Relay

Integration Relay

  1. Disconnect integration relay. Using jumper wires, connect battery positive to terminals No. 1 and 7, and battery negative to terminal No. 10 at integration relay. Connect test light between terminals No. 7 and 9. Refer to STEP 1 in illustration. See Fig 1. If test light illuminates and buzzer sounds for 4-8 seconds, go to next step. If operation is not as specified, replace integration relay.
  2. Repeat step  1. While buzzer is sounding, connect negative lead from battery to terminal No. 8. Refer to STEP 2 in illustration. See Fig 1. Buzzer should stop. Replace integration relay if operation is not as specified.
Fig 1: Testing Integration Relay
G95C60857Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals