Passive Arming Mode

NOTE: Passive arming mode may be turned on or off by performing programming procedure. When passive arming mode is turned off, anti-theft system will be in active arming mode.

Remove ignition key from ignition. Ensure all side doors, rear (luggage compartment) door and hood are closed and unlocked.
NOTE: Step 2 must be fully performed within 30 seconds to obtain proper programming.
Lock and unlock any of side doors 3 times by using ignition key or remote control for keyless entry system. Open driver's door. Lock and unlock driver's door 3 times by using door lock knob on door. After 2 seconds, anti-theft system will now start force lock.
To turn passive mode on, go to next step. To turn passive mode off, go to step 5.
Within 10 seconds, unlock driver's door by using door lock knob on door. Open and close driver's door 4 times, and then lock and unlock driver's door by using door lock knob on door. After 2 seconds, anti-theft system will now start force lock and passive arming mode will be turned on.
Within 10 seconds, unlock driver's door by using door lock knob on door. Open and close driver's door 2 times, and then lock and unlock driver's door by using door lock knob on door. After 2 seconds, anti-theft system will now start force lock and passive arming mode will be turned off.