LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1997 >> LS 400 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Circuit Tests >> Abs Warning Light Circuit (1997 LS400) >> Testing

Abs Warning Light Circuit (1997 LS400): Testing

  1. Check GAUGE fuse, bulb, instrument cluster and wiring. See appropriate INSTRUMENT PANEL article. Repair if necessary. If no problem is found, go to next step.
  2. Check ABS solenoid relay. See ABS SOLENOID RELAY  under COMPONENT TESTS. Replace as necessary. If relay is okay, repair open circuit in Blue/Yellow wire between DLC No. 1 and ABS solenoid relay, or White/Black wire between ABS solenoid relay and ground.
  3. Retrieve codes. See RETRIEVING DIAGNOSTIC TROUBLE CODES (DTC) . If code(s) are stored, repair appropriate circuit. If no codes are stored, go to next step.
  4. Remove short pin from DLC No. 1. See Figure. If light goes out, go to next step. If light does not go out, repair short circuit in Blue/Yellow wire between ABS warning light, DLC No. 1 and ABS ECU.
  5. Check ABS solenoid relay. See ABS SOLENOID RELAY  under COMPONENT TESTS. Replace as necessary. If relay is okay, repair short circuit in Blue/Yellow wire between DLC No. 1 and ABS solenoid relay, or White/Black wire between ABS solenoid relay and ground.
scientia non olet · About LEMON Manuals