LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1995 >> SC 300 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (4.0L V8) >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

WARNING: This page is about a different car, the 1996 Lexus SC 400 and 1995 Lexus SC 400. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Apply grease to center flexible bushing in ends of drive shaft before installing. Ensure drive shaft flange reference marks are aligned. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .
    CAUTION: Install drive shaft center bearing so bracket on drive shaft center bearing is parallel to drive shaft.
  2. Adjust control cables. Fill crankcase with engine oil. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING .
scientia non olet · About LEMON Manuals