LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1995 >> SC 300 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (4.0L V8) >> Engine Oiling >> Oil Pump >> Reassembly

Oil Pump: Reassembly

WARNING: This page is about a different car, the 1996 Lexus SC 400 and 1995 Lexus SC 400. However, it is still accessible from the selected car via links, so may be relevant.
  1. To reassemble, reverse disassembly procedure. Ensure both rotors are installed in oil pump body with identification mark (triangle mark) facing oil pump cover. Tighten oil pump cover bolts to specification. See TORQUE SPECIFICATIONS .
  2. If installing crankshaft front seal, use hammer and Seal Installer (SST 09316-60010). Install seal until seal surface is even with oil pump body. Apply grease to sealing lip of seal.
scientia non olet · About LEMON Manuals