LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1995 >> LS 400 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator & Regulator >> Removal & Installation >> GS300 >> Installation

Removal & Installation : GS300: Installation

  1. Install generator. Install the generator and pipe bracket with the bolt and nut. Torque: 37 Nm (380 kgfcm, 27 ft lbf).
  2. Install the 2 A/T oil cooler pipes with the pipe clamp and bolt. Install wire clamp to clip on generator.
  3. Connect the generator connector. Connect the generator wire with the nut and cap.
  4. Install drive belt. Install the drive belt by turning the drive belt tensioner clockwise. See Figure.
  5. Connect negative (-) terminal cable to battery.
  6. Perform on-vehicle inspection. See ON-VEHICLE TESTING .
  7. Install engine undercover.
scientia non olet · About LEMON Manuals