Removal & Installation: Installation

Before installation, measure torque converter mounting depth. See Fig 1. Measure distance between torque converter mounting surface and transmission/transaxle case front surface. See TORQUE CONVERTER MOUNTING DEPTH table. If distance is less than specified, reposition torque converter until fully seated. Install Black colored torque converter bolt first, and then install remaining bolts.
To complete installation, reverse removal procedure.Refer to the TORQUE SPECIFICATIONS table. Refill all fluids to proper levels. Road test vehicle.

TORQUE CONVERTER MOUNTING DEPTH ⁽¹⁾

Application

In. (mm)

GS 300

.004 (0.1)

⁽¹⁾	Use illustration for measurement procedure. See Fig 1.

Fig 1: Measuring Torque Converter Mounting Depth (Typical)