EFI Main Relay

WARNING: This page is about a different car, the 1995 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

Ensure ignition is off. Remove EFI main relay. See EFI MAIN RELAY LOCATION table.

NOTE: The EFI main relay may also be identified using appropriate illustration in THEORY/OPERATION - 3.0L article or wire color. See wiring diagram in the WIRING DIAGRAMS article.

EFI MAIN RELAY LOCATION

Application	Location
Camry	Fuse/Relay Box Near Driver's Side Front Corner Of Engine Bay

Using ohmmeter, check continuity between specified terminals. See Fig 1 or Fig 3 .
Check EFI main relay operation by applying battery voltage and ground and checking continuity between specified terminals. See Fig 2 or Fig 4 . Replace EFI main relay if defective.

Fig 1: Testing EFI Main Relay (Checking Continuity - With Bosch Relay)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Testing EFI Main Relay (Checking Operation - With Bosch Relay)

Fig 3: Testing EFI Main Relay (Checking Continuity - With Nippondenso Relay)

Fig 4: Testing EFI Main Relay (Checking Operation - With Nippondenso Relay)