Power Seat Switch Test (Driver's Side)

Disconnect switch connector. Leave switch in neutral position. At switch connector, check for continuity between terminal No. 13 and all other terminals. See Figure. If there is continuity, replace switch.
If there is no continuity, check for continuity between specified terminals of switch connector, with switch in specified position. See appropriate POWER SEAT SWITCH TEST table. If there is no continuity, replace switch. If there is continuity, switch is okay.

POWER SEAT SWITCH TEST (DRIVER'S SIDE)

Switch Position

⁽¹⁾ Terminal No.

Headrest Up/Down

13 & 16

Down

13 & 15

Slide

Forward

13 & 12

Backward

13 & 11

Front Up/Down

13 & 10

Down

13 & 9

Rear Up/Down

13 & 6

Down

13 & 5

Recline

Forward

13 & 3

Backward

13 & 4

Lumbar Support

Forward (Out)

1 & 7; 2 & 4

Off

1 & 7; 2 & 7

Backward (In)

1 & 4; 2 & 7

⁽¹⁾	See Figure.