LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1993 >> SC 400 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L V8 >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

  1. To install, reverse removal procedure. Ensure drive shaft flange reference marks are aligned. Tighten fasteners to specification. See TORQUE SPECIFICATIONS  table.
  2. Adjust control cables. Fill crankcase with engine oil. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING  under REMOVAL & INSTALLATION.
CAUTION: Ensure crossmember located below transmission is installed with front mark arrow pointing toward front of vehicle. Front mark arrow is located in center of crossmember, on bottom side of crossmember. Install drive shaft center bearing so bracket on drive shaft center bearing is parallel to drive shaft.
scientia non olet · About LEMON Manuals