Service Precautions

NOTE: On Accord EX and certain Prelude models, technician should obtain 5-digit stereo theft protection security code before disconnecting battery cable.

Observe these precautions when working with air bag systems:

In most instances, disable SRS before servicing any SRS or steering column component. Failure to do this could result in accidental air bag deployment and possible personal injury. See DISABLING & ACTIVATING AIR BAG SYSTEM .
After repairs, turn ignition on while ensuring any accidental air bag deployment will not cause injury. Ensure SRS indicator light is working properly and no system faults are indicated. See SYSTEM OPERATION CHECK .
Always wear safety glasses when servicing or handling an air bag.
Air bag module must be stored in its original special container until used for service. It must be stored in a clean, dry place, away from sources of extreme heat, sparks and high electrical energy.
When placing, a live air bag module on a bench or other surface, always face air bag and trim cover up, away from surface. This will reduce motion of module if it is accidentally deployed.
NEVER allow any, electrical source near inflator on back of air bag module.
When carrying a live air bag module, trim cover should be pointed away from your body to minimize injury in case of accidental deployment.
DO NOT probe a wire through insulator; this will damage wire and eventually cause failure due to corrosion.
When installing SRS wiring harnesses, ensure they will not be pinched or interfere with other vehicle components.
Inspect all ground connections, and ensure they are clean and tight.
If SRS is not fully functional for any reason, vehicle should not be driven until system is repaired. DO NOT remove any component or in any way disable system from operating normally. If SRS is not functional, park vehicle until repairs can be made.