LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1992 >> SC 400 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Cold Start Injector (Es300) >> Installation

Cold Start Injector (Es300): Installation

  1. Install injector with a new gasket, and tighten to specification. See TORQUE SPECIFICATIONS  table.
  2. Using 2 new gaskets, connect injector pipe with union bolt and tighten to specification. See TORQUE SPECIFICATIONS  table. Connect cold start injector connector. Connect cable to negative battery terminal. Check for fuel leaks.
scientia non olet · About LEMON Manuals