LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Range Rover Evoque R-Dynamic SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Speed Control -- Range Rover EVOQUE/L551 >> Speed Control (G2320136) >> Removal And Installation >> Speed Control Switch (G2297511) >> Installation

Speed Control Switch (G2297511): Installation

    • Install the speed control switch.
    • Connect the electrical connector.
    • Install and tighten the screw.

      Torque  : 2 Nm 

  2. NOTE: Make sure that the harness is routed to the position noted on removal.
    • Install the paddle shifter.
    • Connect the electrical connector.
    • Install and tighten the screw.

      Torque  : 2.5 Nm 

  3. Install the driver airbag.

    Refer to: DRIVER AIRBAG .

  4. Connect the startup battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT .

  5. Make the air bag supplemental restraint system (SRS) safe.

    Refer to: SUPPLEMENTARY RESTRAINT SYSTEM HEALTH AND SAFETY PRECAUTIONS .

scientia non olet · About LEMON Manuals