Transfer Case - Vehicles With: Twin Speed Transfer Case (G1699533): Specifications
SEALERS AND LUBRICANTS SPECIFICATIONS
| ITEM |
SPECIFICATION |
| * Recommended oil |
Shell TF 0753 |
| Capacity - Wet and dry fill |
1.5 litres, (2.6 pints) (1.5 US quarts) |
| Input shaft splines grease |
Weicon TL7391 |
| Transfer case sealant |
TL 7990 Hylomar black 102 or equivalent |
CAUTION:
* Do not use any lubricant other than that specified
| ITEM |
SPECIFICATION |
| Model |
DD295 |
| Type |
Two speed, permanent four wheel drive transfer box having synchronised low to high ratio shift on the move facility with an actively controlled wet clutch and 50/50 torque split across the centre differential |
| Clutch type |
Wet, multi-plate |
| Maximum torque capacity |
2500 Nm (1842.5 lb-ft) |
| Ratios: |
|
| High |
1:1 |
| Low |
2.93:1 |
| Maximum shift speeds: |
|
| High to low ratio |
0 kph (0 mph) |
| Low to high ratio |
60 kph (37.2 mph) |
TORQUE SPECIFICATIONS
| DESCRIPTION |
NM |
LB-FT |
| Transfer case fluid drain plug |
28 |
21 |
| Transfer case fluid filler/level plug |
28 |
21 |
| Transmission support insulator to transfer case bolts |
60 |
44 |
| Transfer case to transmission bolts |
45 |
33 |
| Wiring bracket bolts |
25 |
18 |
| Earth strap bolt |
25 |
18 |
| Transfer case shift motor bolts |
35 |
26 |
| Transfer case clutch control solenoid bolts |
5 |
4 |
| Transfer case high/low range position sensor bolts |
5 |
4 |
| Front driveshaft to transfer case output flange: |
|
|
| Stage 1 |
45 |
33 |
| Stage 2 |
Further 90° |
Further 90° |