Pinpoint Test A: Snapshot - Extended Data Checks
- A1: CHECK AND RECORD SNAPSHOT VALUES
- Note the DTC Snapshot data value of DTC Extended Data value - Total Operation Cycles with test failed Status
- Note the DTC
Snapshot data value of DTC
Extended Data value - Total Operation Cycles since First test failed Status
Are both these values 3 or greater?
Yes: GO to A2.
No: The DTC should be considered as intermittent . Refer to the appropriate Intermittent DTC ACTION in the table below
- A2: COMPARISONS OF SNAPSHOT VALUES WHEN BOTH VALUES ARE 3 OR GREATER
- Compare the values of DTC
Extended Data value - Total Operation Cycles with test failed Status and DTC
Extended Data value - Total Operation Cycles since First test failed Status
Are the two values either the same, or only differing within a count of one?
Yes: The DTC should be considered as permanent . Refer to the appropriate Permanent DTC ACTION in the table below
No: The DTC should be considered as intermittent . Refer to the appropriate Intermittent DTC ACTION in the table below
- Compare the values of DTC
Extended Data value - Total Operation Cycles with test failed Status and DTC
Extended Data value - Total Operation Cycles since First test failed Status