Transfer Case - Vehicles With: Single Speed Transfer Case (G1728689): Specifications
SEALANTS AND LUBRICANTS SPECIFICATIONS
| ITEM |
SPECIFICATION |
| * Recommended oil |
Castrol BOT850 |
| Capacity - Wet and dry fill |
0.75 liters, (1.3 pints) (0.8 US quarts) |
| Input shaft splines grease |
Weicon TL7391 |
| Transfer case sealant |
TL 7990 Hylomar black 102 or equivalent |
CAUTION:
* Do not use any lubricant other than that specified
| ITEM |
SPECIFICATION |
| Model |
ITC Torsen |
| Type |
Single speed, permanent four wheel drive transfer box with 42 front/58 rear (± 20% to either axle, dependent on traction) torque split across the center differential |
| Ratio |
1:1 |
TORQUE SPECIFICATIONS
| DESCRIPTION |
NM |
LB-FT |
| Transfer case fluid drain plug |
28 |
21 |
| Transfer case fluid filler/level plug |
28 |
21 |
| Transmission support insulator to transfer case bolts |
60 |
44 |
| Transfer case to transmission bolts |
45 |
33 |
| Transfer case bolts |
35 |
26 |
| Wiring bracket bolts |
24 |
18 |
| Transfer case damper nuts |
18 |
13 |
| Earth strap bolt |
25 |
18 |
| Front driveshaft to transfer case output flange bolts: |
|
|
| Stage 1 |
45 |
33 |
| Stage 2 |
Further 90° |
Further 90° |
| Rear driveshaft to transfer case output flange bolts |
150 |
111 |