DTC U2012-87: Car Configuration Parameter(s) - Missing message: Action

NOTE:

Do NOT replace any module's just on the basis of this DTC .
After updating the CCF , set the ignition to the ON position and wait 60 seconds before clearing the DTC (s).

Using the JLR approved diagnostic equipment, check and update the CCF as required.
Using the JLR approved diagnostic equipment, clear the DTC (s) and retest. If the fault persists, re-configure the PSCM with the latest level software.
Using the JLR approved diagnostic equipment, check the BCM for related DTC (s) and refer to the relevant DTC Index. REFER to: DIAGNOSTIC TROUBLE CODE INDEX - DTC: BODY CONTROL MODULE (BCM) .