DTC U2300-56: Central Configuration - Invalid/Incomplete Configuration: Action
NOTE:
- After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs.
- This DTC may false-flag. If there are no other obvious faults with the operation of the terrain response switchpack, this DTC should be ignored
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the DTCs and retest
- Check the terrain response switchpack part number, install the correct part as required. Clear the DTC and retest
- If the fault persists, using the Jaguar Land Rover approved diagnostic equipment, complete a CAN network integrity test
- Refer to the appropriate service information and test the high speed CAN circuit for short circuit to ground, short circuit to power, open circuit, high resistance