DTC U3001-46: Control Module Improper Shutdown - Calibration/parameter memory failure: Action

NOTE: Do NOT replace the module to repair this DTC

Using the Jaguar Land Rover approved diagnostic equipment, check the snapshot data (0x4237) to identify the lost calibration axes
If the front seat axes have lost calibration, using the Jaguar Land Rover approved diagnostic equipment, perform routine - Calibration Run (0x205F). Clear the Diagnostic Trouble Code(s) and retest
If the rear seat axes have lost calibration, using the Jaguar Land Rover approved diagnostic equipment, perform routine - Calibration Run (0x2055). Clear the Diagnostic Trouble Code(s) and retest