DTC P0333-22 Knock/Combustion Vibration Sensor 2 Circuit High Bank 2 - Signal amplitude > maximum: Action

Knock sensor bank 2 front

• Refer to the system wiring diagrams and check knock sensor circuit for short circuit to power
• Measure knock sensor circuit for correct resistance
  • Knock sensor shunt resistor (resistance between 2 signal lines) 4.9 Mega Ohms +/- 20%
• Inspect connectors for signs of water ingress and pins for damage and/or corrosion
• Check for abnormal engine noise that may corrupt the knock sensor signal
• Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest
• Install new knock sensor, only when diagnosed as failed