DTC P0332-21 Knock/Combustion Vibration Sensor 2 Circuit Low Bank 2 - Signal amplitude < minimum: Action

Knock sensor bank 2 front

• Check powertrain control module for related misfire Diagnostic Trouble Code(s) and refer to this DTC index. Rectify these first
• Refer to the system wiring diagrams and check knock sensor circuit for short circuit to ground, short circuit to power
• Measure knock sensor circuit for correct resistance
  • Knock sensor shunt resistor (resistance between 2 signal lines) 4.9 Mega Ohms +/- 20%
• Inspect connectors for signs of water ingress and pins for damage and/or corrosion
• Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest
• Install new knock sensor, only when diagnosed as failed