DTC U3000-93: Control Module - No operation: Action
NOTE:
Check to see if this DTC only sets at specific locations, this could be due to environmental factors interfering with the radar signals
- Allow the system temperature to return to normal. Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest
- Using the Jaguar Land Rover approved diagnostic equipment, check the live data signal - Main ECU Voltage Supply (0xD020)
- If the fault persists, using the Jaguar Land Rover approved diagnostic equipment, reconfigure the cruise control module with the latest level software, clear the Diagnostic Trouble Code(s), cycle the ignition and retest
- If the fault persists, install a new cruise control module
- Refer to GENERAL PROCEDURES and calibrate the cruise control system