Emergency Park Release

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

To disengage the transmission from PARK:

• Make sure the vehicle is secured through the foot brake (2 people required) or wheel chocks.
• Open the hood and remove the engine cover.
• Pull the Emergency Park Release (EPR) operating lever upwards and make sure it locks in the vertical position. A flashing 'N' symbol will appear on the information and message center to signify that the EPR is activated.

To engage the transmission into PARK:

• Release the latch using a small flat blade screwdriver or similar instrument and lower the EPR operating lever to the horizontal position. Do not force the operating lever to the closed position as this will result in damage to the system. The transmission PARK pawl switch engages when the latch is released. The information and message center displays a 'P' symbol to show that the transmission is returned to PARK.
• Replace the engine cover and close the hood.
• Remove the wheel chocks if used and make sure the vehicle is held on the brakes until the transmission engages into PARK.