LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Discovery R-Dynamic HSE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Speed Control -- Discovery/L462 >> Speed Control (G2148859) >> Removal And Installation >> Speed Control Switch (G1899121) >> Installation

Speed Control Switch (G1899121): Installation

    • Install the speed control switch.
    • Install the retaining screw.
    • Connect the electrical connector.
  2. NOTE: Make sure that the harness is routed to the position noted on removal.
    • Connect the electrical connector.
    • Install the paddle shifter.
    • Install the retaining screw.
  3. Install the driver airbag.

    Refer to: DRIVER AIRBAG

  4. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS

scientia non olet · About LEMON Manuals