DTC P0950-29: Auto Shift Manual Control Circuit - Signal signal invalid: Action
NOTE:
No repair actions relating to the transmission or transmission control module will rectify this fault.
- Prioritized steps to perform:
- Check the transmission control switch for DTCs and rectify as required. Check the gear shift system for correct operation
- Using the Jaguar Land Rover approved diagnostic equipment, check the vehicle for CAN bus (FlexRay) related DTCs and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest
- If the fault persists, raise a Technical Assist (TA) for further support