DTC B1D4A-52: Camera Washer Pump Control A - Not activated: Action
NOTE:
To validate the repair use the Jaguar Land Rover approved diagnostic equipment to perform the diagnostic routine - Enable Protected Outputs (205E). The diagnostic routine can be located on the diagnostic equipment within "BCM - ECU functions". When complete check the camera washer function, then using the Jaguar Land Rover approved diagnostic equipment to check that this DTC is no longer set within the body control module
- Install a new camera washer pump control A relay as necessary
- Refer to the electrical circuit diagrams and check the camera washer pump control A circuit for short circuit to power. Repair the wiring harness as necessary