DTC U2300-56: Central Configuration - Invalid/incomplete configuration: Action
NOTE:
Allow a minimum of 17 seconds from ignition on before running the car configuration file update routine
- Using the Jaguar Land Rover approved diagnostic equipment, check the gateway module for related Diagnostic Trouble Code(s) and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, run the routine - Allow Central Configuration Data Learning (0x0E06)
- Clear the Diagnostic Trouble Code(s), cycle the ignition twice, wait for 3 minutes and retest
- If the fault persists contact Jaguar Land Rover technical assistance