DTC P0C2C-85: Electric/Auxiliary Transmission Fluid Pump Control Module Feedback Signal Range/Performance - Signal above allowable range: Action

Prioritized steps to perform:
Make sure the hybrid/EV battery pack is fully charged and rectify as required
Using the Jaguar Land Rover approved diagnostic equipment, check for other transmission related DTCs and refer to the relevant DTC index
Using the Jaguar Land Rover approved diagnostic equipment, check for electric automatic transmission fluid pump related DTCs and perform the relevant corrective actions
Using the Jaguar Land Rover approved diagnostic equipment, reconfigure the transmission control module with the latest level software
Check the security and integrity of the transmission ground point and check the resistance from the transmission ground to the vehicle ground. Rectify as required
Check the security and integrity of electric automatic transmission fluid pump ground and check resistance from electric automatic transmission fluid pump GND to vehicle ground. Rectify as required
Check the electric automatic transmission fluid pump KL15 circuit for voltage supply. Rectify as required
Disconnect the transmission connector at the transmission and check for damage or water ingress to the connector. Rectify as required
Check electric automatic transmission fluid pump connector for damage or water ingress. Rectify as required
Check the transmission fluid level using the Jaguar Land Rover approved diagnostic equipment to run the 8-speed ZF - Automatic Transmission Fluid Level Check Application. Refer to the relevant service information and check the automatic transmission fluid quality For additional information, Refer to: TRANSMISSION OIL COLOR CHART If the automatic transmission fluid condition is unsatisfactory, raise a Technical Assist (TA) for further support. Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, raise a Technical Assist (TA) for further support
Using the Jaguar Land Rover approved diagnostic equipment, clear DTCs and retest
If the fault persists, raise a Technical Assist (TA) for further support