DTC C2008-19: Left Motor - Circuit current above threshold: Action
- Refer to the electrical circuit diagrams and check the electric park brake left actuator circuits for short circuit to ground, short circuit to power. Repair circuit(s) as required. Clear DTCs, apply the park brake and retest
- Check for any other electric park brake actuator-related DTCs and refer to the relevant DTC index
- Check for a seized rear left brake caliper, or brake pads binding in the caliper. Rectify as necessary
- If the fault persists, run calibration routine - Assembly Test - to return the actuator to the normal position
- If the fault persists, cycle ignition and clear DTCs. Temporarily connect the right actuator harness to the left actuator and vice versa, then apply and release the park brake. If DTC C2007-19 is set, replace the electric park brake left actuator. If DTC C2008-19 is set, check the electric park brake left actuator power circuit for short circuit faults and repair circuits as required. Reconnect actuator harnesses in original positions, clear DTCs and retest