DTC C2007-19: Right Motor - Circuit current above threshold: Action
- Refer to the electrical circuit diagrams and check the electric park brake right actuator circuits for short circuit to ground, short circuit to power. Repair circuit(s) as required. Clear DTCs, apply the park brake and retest
- Check for any other electric park brake actuator-related DTCs and refer to the relevant DTC index
- Check for a seized rear right brake caliper, or brake pads binding in the caliper. Rectify as necessary
- If the fault persists, run calibration routine - Assembly Test - to return the actuator to the normal position
- If the fault persists, cycle ignition and clear DTCs. Temporarily connect the left actuator harness to the right actuator and vice versa, then apply and release the park brake. If DTC C2008-19 is set, replace the electric park brake right actuator. If DTC C2007-19 is set, check the electric park brake right actuator power circuit for short circuit faults and repair circuits as required. Reconnect actuator harnesses in original positions, clear DTCs and retest