DTC P3004-94: Driveline Disconnect Control Module - Unexpected operation: Action
NOTE:
Re-configuring the all wheel drive control module will automatically re-configure the driveline disconnect control module.
- Using the Jaguar Land Rover approved diagnostic equipment, check datalogger signal - Driveline Disconnect Control Module Power Supply Voltage (0x0761)
- Using the Jaguar Land Rover approved diagnostic equipment, re-configure the driveline disconnect control module with the latest level software
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new driveline disconnect control module