DTC C0044-01: Brake Pressure Sensor "A" - General electrical failure: Action
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Land Rover Range Rover Evoque, 2018 Land Rover Range Rover Evoque, 2017 Land Rover Range Rover Evoque, 2016 Land Rover Range Rover Evoque, and 2015 Land Rover Range Rover Evoque. However, it is still accessible from the selected car via links, so may be relevant.
- Check the brake pedal switch installation
- Check the brake pedal switch adjustment
- Refer to the appropriate SYSTEM WIRING DIAGRAMS and check the brake pedal switch circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair circuit as required
- Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTCs and retest. If the fault persists, install a new anti-lock brake system control module