DTC U0302-57: Software Incompatibility with Transmission Control Module - Invalid/incomplete software component: Action

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Land Rover Range Rover Evoque, 2018 Land Rover Range Rover Evoque, 2017 Land Rover Range Rover Evoque, 2016 Land Rover Range Rover Evoque, and 2015 Land Rover Range Rover Evoque. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs.
After installing a new transmission control module, perform routines - Configure New Module (Without Transmission Replacement), Transmission Control Module Adaption.

Using the Jaguar Land Rover approved diagnostic equipment, check and up-date the car configuration file as necessary. Clear the DTCs and retest
Using the Jaguar Land Rover approved diagnostic equipment, re-configure the transmission control module with the latest level software
Install a new transmission control module as necessary