DTC B1C30-73: Disable Switch - Park Aid - Actuator stuck closed: Action
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Land Rover Range Rover Evoque, 2018 Land Rover Range Rover Evoque, 2017 Land Rover Range Rover Evoque, 2016 Land Rover Range Rover Evoque, and 2015 Land Rover Range Rover Evoque. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the electrical circuit diagrams and check the parking aid switch signal circuit for short circuit to ground. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTC and run the on demand self test. If the problem persists, suspect the control switch
- Check the switch function