DTC U200E-11: Control Module Output Power B - Circuit short to ground: Action
WARNING: This page is about a different car, the 2021 Land Rover Range Rover and 2020 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate service information and inspect the slave headlamp (Headlamp Control Module B) LIN bus circuit for short circuit to ground. Including the internal harness and connections. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists, install a new slave headlamp (Headlamp Control Module B) assembly